Matt, clear finish for enhancing and protecting the natural timber grain.
Engrained is a water based all in one stain and topcoat sealant, formulated for use over raw timber. Easy to apply, odourless and eco-friendly, it delivers a highly durable, impervious protective matt finish. Suitable for interior and exterior use, and for high traffic surfaces including counter/table tops, kitchen/bathroom cabinets.
HOW TO USE
Ensure the surface is clean and free from mould, dirt, dust, grease and wax. Shake the tin prior to opening. Stir well with a broad flat stirrer before use. Decant the required amount into a suitable container to work from. Reseal the tin airtight for longevity. Apply an even coat following the grain, using a lint free cloth, brush, sponge or foam roller. The surface will be touch dry in 30 minutes, and may be recoated after 2 hours. Lightly sand between coats should the grain become raised. A two coat application is recommended. One coat will deliver a matt sheen wash effect – use Bare Grain Clear as the final coat where no further opacity is required. Two coats will deepen the colour opacity. Three coats will produce full coverage. Allow 7 days to fully cure before use.